BGC-Fi Powered by ClodPi Pro Hotspot

LOADING

OUR PRODUCTS


Product thumbnail

BGC-Fi powerd by pro hotspot

BGC-Fi powerd by ClodPi pro hotspot does efficiently operate on low power consumption using as much power as a broadband router (15W) with signals covering long range allowing connectivity to tens of thousands of LoRaWAN® end nodes within the range

Product name: ClodPi Pro Hotspot
Model: Indoor
WAN protocol: LoRaWAN
Channel Plan: IN865
Channel Capacity: 8-channels uplink, 1-channel downlink
Frequency band: 865-867 Mhz
Modulation: Based on LoRaWAN
RF Transceiver: SX1302 with SX1250
Transmit RF Power: 0.5W (up to 27 dBm)
Receive Sensitivity: Down to -142 dBm
Output Power: 27dBm Maximum output power before antenna
Processor: ARM 64 Bit Hexa-core
Quad-core ARM Cortex-A53 up to 1.4G
Dual-core ARM Cortex-A72 up to 1.8G
RAM: 4GB DDR3
Flash: 64GB eMMC 5.1 Flash
WiFi: 2.4GHz & 5GHz Wi-Fi / 802.11 a/b/g/n/ac
Input (V): DC12V
Antenna type: LoRa Rubber Duck (3+0.5):SMA Male
Ethernet: RJ45 Ethernet jack (Gigabit ethernet)
Power supply: 6.4mm, 12 Volt power jack
Interfaces: 1 LAN port, 1 LoRa antenna connectors, USB Port
Dimensions: L:106 x W:151 x H:26 mm
Chassis: PC-ABS, Aluminium and sheet metal
Color: Black and Silvery Gray (Aluminium)
Ingress Protection: IP30
Weight: 0.8 kg
Security: ECC608 Hardware Key
Operating Temperature: 0° to +60°C
Storage Temperature: -40° to +85° C
Relative Humidity: 20% to 90%, non-condensing
Heat Dissipation: Radiator Grille

IP67 Enclosure 3.5 dbi fibreglass antenna Surge arrester 75 cm antenna Cable poe 802.3at injector 30w 12v .5 amps PoE splitter

Enclosure Material: Fiberglass Reinforced Polyester

Enclose and protect electrical and electronic controls, instruments or components for indoor and outdoor applications. Especially well suited for extreme temperature and corrosive environments.

Non-corrosive, non- conductive, UV protected, Flameretardent, Impact resistant, Chemical Resistant, Leight Weight with lower installation cost, Negligible maintenance cost, easy to modify and Loger life cycle compare to Steel/Polycarbonate. Rigid design with Back panel inserts plus Stainless Steel wall mounting brackets and neoprene gasket encased in a continous channel on the cover.

Product thumbnail
Product thumbnail
Product thumbnail

GET IN TOUCH


We would love to hear from you.

LEAVE US A MESSAGE

* required field

OUR DETAILS